|
DTXM1065 - 16T Mild-Modified ESC with ABS Brakes
and Reverse Spec Sheet
| Input
power: |
7.2
to 8.4 volts DC (6-7 cells) |
| Operating
frequency: |
1.0
kHz |
| BEC:
|
5.0
volts / 1.0 amp |
| On-Resistance: |
0.0046
ohms |
| Max.
Constant Current: |
192
amps |
| Max.
Peak Current: |
660
amps |
| Acceleration
time delay: |
0.0,
0.1, and 0.2 seconds |
| Motor
Turns Limit: |
no
fewer than 16 turns |
| Case
Size (with heat sink): |
1.48
x 1.34 x 0.57” (42 x 38 x 16 mm) |
| Weight
(with heat sink): |
2.19
oz. (62 g) |
Typical Application: a great reversing ESC for beginner-to-intermediate
modelers, with easy to use pushbutton setup, ABS brakes for excellent
control in and out of corners, great power output to easily handle
mild-modified motors down to 16-turns, adjustable reverse-delay,
reverse-lockout for racing, and traction control for superb handling.
1. Fully proportional forward and reverse control, with ABS
brake.
2. Pushbutton setup, with high visibility red and green setup
LEDs.
3. For mild-modified motors having no fewer than 16 turns.
Great for sport or intermediate racing uses.
4. Anti-Lock Brake System (ABS) enables greater control while
cornering.
5. Reverse-lockout disables reverse direction for racing
purposes.
6. Adjustable reverse-delay protects gears when shifting
from forward to reverse.
7. Adjustable traction control to custom set acceleration
speeds and reduce wheelspins.
8. High frequency operation for smooth control, low operating
temperatures, and to maximize battery run-time.
9. Pre-installed on/off switch, motor, battery, and Futaba-J
radio connectors.
10. Thermal protection, to prevent damage from current overload.
120 day warranty (U.S. and Canada only)
|
 |
