|
DTXM1070 - 12T Modified ESC with ABS Brakes and Reverse
Spec Sheet
| Input
power: |
7.2
to 8.4 volts DC (6-7 cells) |
| Operating
frequency: |
1.0
kHz |
| BEC:
|
5.0
volts / 1.0 amp |
| On-Resistance: |
0.0035
ohms |
| Max.
Constant Current: |
232
amps |
| Max.
Peak Current: |
800
amps |
| Acceleration
time delay: |
0.0,
0.1, and 0.2 seconds |
| Motor
Turns Limit: |
no
fewer than 12 turns |
| Case
Size (with heat sink): |
1.48
x 1.34 x 0.57” (42 x 38 x 16 mm) |
| Weight
(with heat sink): |
2.44
oz. (69 g) |
Typical Application:
a great reversing ESC for intermediate-to-advanced racers, with
easy to use pushbutton setup, ABS brakes for excellent control in
and out of corners, great power output to easily handle modified
motors down to 12-turns, adjustable reverse-delay, reverse-lockout
for racing, and traction control for superb handling.
1. Fully proportional forward and reverse control, with ABS
brake.
2. Pushbutton setup, with high visibility red and green setup
LEDs.
3. For modified motors having no fewer than 12 turns. Great
for intermediate or advanced racing uses.
4. Anti-Lock Brake System (ABS) enables greater control while
cornering.
5. Reverse-lockout disables reverse direction for racing
purposes.
6. Adjustable reverse-delay protects gears when shifting
from forward to reverse.
7. Adjustable traction control to custom set acceleration
speeds and reduce wheelspins.
8. High frequency operation for smooth control, low operating
temperatures, and to maximize battery run-time.
9. Pre-installed on/off switch, motor, battery, and Futaba-J
radio connectors.
10. Thermal protection, to prevent damage from current overload.
120 day warranty (U.S. and Canada only)
|
 |
