• Expanded LCD with extremely simple menus and controls!
  
  
• Great for electric R/C car, truck and boat batteries
  
  
• Handles 1-10 NiCd or NiMH cells and 1-4 Lithium-Ion or Lithium-Polymer cells (Li-Ion/LiPo)
  
  
• Peak detection with adjustable sensitivity for NiCd and NiMH batteries
  
  
• "Constant current / constant voltage" charge method for Li-Ion/LiPo batteries
  
  
• 0.1 - 8.0A adjustable charge current (1C max. for Li-Ion/LiPo)
  
  
• Four high-performance charge methods: linear, reflex, impulse and 4-step
  
  
• Adjustable peak sensitivity (0-25mV)
  
  
• Top-off charge feature fully charges NiMHs without overheating
  
  
• Optional fast charge thermal cutoff (temperature sensor optional)
  
  
• 0 - 500mA adjustable trickle charge current (NiCd and NiMH only)
  
  
• 0.1 - 10.0A adjustable discharge current
  
  
• 0.1 - 1.1V adjustable discharge cutoff voltage for NiCd and NiMH
  
  
• 2.5 - 3.7V adjustable discharge cutoff voltage for Li-Ion/LiPo
  
  
• Perform 1 to 10 cycles (NiCd and NiMH only)
  
  
• Adjustable cool-off delay for cycling (1-30 minutes)
  
  
• Recall data for 10 full cycles on an expanded 8-line, 21 character LCD
  
  
• Configure up to 10 batteries in memory for instant, easy recall and charger set-up. Set custom names for all packs in memory.
  
  
• Displays input and output voltage, battery resistance, max. battery temperature, charge and discharge currents, voltages, time, and capacity and much more
  
  
• Custom display graphs charge and discharge voltage curves - great for evaluating pack performance!
  
  
• Motor break-in feature: output adjustable from 1.0-8.0V, 1-120 minutes, and 10A constant (30A surge) for break-in of motors or operating commutation lathes
  
  
• Adjustable sound cues, LCD contrast, fan operation, temperature scale and more
  
  
• Loaded with safety features and warning screens (cool-off time delay, maximum charge voltage, maximum battery capacity cutoff, improper input voltage, reverse polarity, open or shorted output, poor battery voltages and temperatures, poor motor connections, excessive charger heating, and more)
  
  
• Rugged aluminum case, two pushbuttons, and rotating dial that also acts as pushbutton for easy navigation of all menus
  
  
• Built-in cooling fan, for better charge efficiency and extended life of charger
  
  
• Banana jacks on output with two charge adapters included
  
  
• Banana plugs pre-installed on input lead. Large alligator clips included which directly mate to banana plugs on input.

Return to ICE Home Page